Flybe flight plunged 500 feet due to incorrect autopilot setting, new report reveals
'The crew subsequently reported that they had become visual with the ground during the recovery', says the report

A Flybe flight that nosedived at a rate of 4,300 feet a minute was down to an incorrect autopilot setting, according to an incident report this morning.
The aircraft dropped 500 feet in 18 seconds, according to the report from the Air Accidents Investigation Branch (AAIB), falling to 928 feet. During the steep descent, the crew were able to see the ground, it said.
Forty-four passengers and crew were onboard the Flybe aircraft that was flying from Belfast to Glasgow on 11 January 2018.
According to the AAIB flight incident report, the autopilot was engaged when the aircraft reached 1,350 feet, but at a height of 1,500 feet the aircraft “started to gradually pitch nose-down”. During the next 15 seconds, the aircraft “descended at an increasing rate”.
At 1,300 feet, the pilot “disconnected the autopilot and applied nose-up pitch to arrest the rate of descent, which had reached a maximum of 4,300 feet a minute”.
The pilot “reacted promptly in accordance with the trained sequence of actions and returned the aircraft to a safe flight path. During the event the aircraft lost about 500 ft in 18 seconds, with a maximum rate of descent of 4,300 ft/min and having reached a minimum height of 928 feet”.
The flight eventually continued onto Glasgow, “where it made an uneventful landing”.
A Flybe spokesperson said in a statement: “Flybe maintains a rigorous approach to ensuring the very highest flying standards are maintained. We thank the AAIB for concluding its constructive investigation and report on the incident which took place on 11 January 2018.
“As reported by the AAIB, Flybe implemented remedial actions quickly in response to the incident and our training and procedures have been amended to minimise the risk of a reoccurrence.
“Flybe operates over 158,000 flights a year and the safety of our passengers and crew remains our number one priority.”
Join our commenting forum
Join thought-provoking conversations, follow other Independent readers and see their replies
Comments