How to bring drowned gadgets back to life
Your support helps us to tell the story
From reproductive rights to climate change to Big Tech, The Independent is on the ground when the story is developing. Whether it's investigating the financials of Elon Musk's pro-Trump PAC or producing our latest documentary, 'The A Word', which shines a light on the American women fighting for reproductive rights, we know how important it is to parse out the facts from the messaging.
At such a critical moment in US history, we need reporters on the ground. Your donation allows us to keep sending journalists to speak to both sides of the story.
The Independent is trusted by Americans across the entire political spectrum. And unlike many other quality news outlets, we choose not to lock Americans out of our reporting and analysis with paywalls. We believe quality journalism should be available to everyone, paid for by those who can afford it.
Your support makes all the difference.If you accidentally drowned your shiny new widget, don't stress as you're not alone.
In the UK, the British managed to drop a staggering 850,000 phones down the toilet in 2007 and this number will have only grown since then.
Luckily in many cases a drowned gadget can be resuscitated back to life using several simple steps. Old wives tales and urban myths abound on how to dry and fix a sodden phone (e.g. packing phones in uncooked rice or baking it in an oven etc.), yet most of these will at best deliver mixed results or more seriously can potentially be dangerous. Here's a quick step by step guide to safely attempting to bring back a drowned phone or PDA.
1. As soon as possible (preferably as soon as a dunking has happened), remove the device's battery to prevent any electrical shorts from creating permanent damage and once the battery is out, shake out any excess water.
2. Dry your gadget using a soft absorbent towel. Remove any battery covers, memory cards etc. Grabbing a blow dryer, set it to low heat and position it to blow on your widget from approximately 100cm away. Keep an eye on it for the first 10-15 mins, checking to ensure it doesn't get too hot. If the device gets too hot to touch, turn off the blow dryer immediately, leaving your gizmo to cool down. Increase the distance between the blow dryer and your device and start again. You'll probably need to do this for at least an hour, maybe even 2 - 3 hours.
3. Next, drop your device into a small container and loosely pack it with cotton balls. Whilst some suggest using rice, cotton balls won't leave a starchy residue, and won't gunk up your device. Ideally you should leave it packed in cotton balls sitting in an airing cupboard for at least 24 hours, longer if necessary.
4. By now your device should be dry and the cotton balls damp. Check the device thoroughly for water, if any can be seen behind its screen, keys and other parts, repeat step 3 until there is no trace of water.
Assuming your device looks and feels dry, re-insert its battery back and try switching it on. If it won't start, your battery could be dead and might need to be charged. Before doing any charging, make sure that the battery is a 110 per cent dry before charging it. As there may be some moisture still inside the device do not connect it to its power adaptor/charger to see if it works as this could permanently damage your device, blow a fuse or make your hair stand on end.
5. If device refuses to work after 24 hours, repack it in cotton balls, put it in the airing cupboard and give it another 48 hours before trying to restart it. If your device still refuses to work, use its power adaptor/charger and see if that works. If at that point it still doesn't want to play ball, you'll probably need accept defeat.
Source: New Zealand Herald
Join our commenting forum
Join thought-provoking conversations, follow other Independent readers and see their replies
Comments